User guide

88 Palm Handhelds
3. Rotate the Globalstar satellite antenna (as shown on page 79) and
make sure you have a Globalstar signal.
4. On your Palm handheld, open a terminal application (such as Online).
5. Make sure the application is configured with the following settings:
6. Enter the AT command $QCPKND=1 and the telephone number you
want to dial.
For example: $QCPKND=1;T303-555-1212
7. Make the connection.
Setting: Value:
Data bits 8
Parity none
Stop bit 1
Baud rate Must match the baud rate on your Tri-Mode Phone (default:
38400). To check the baud rate on your Tri-Mode Phone, select
menu, then select Features > Data > Baud Rate.