User guide

84 Palm Handhelds

Configuring Network Details

1. On the Preferences/Network screen, tap Details....

2. On the

Details screen, make sure the “Connection type” is “PPP.”

Globalstar packet data service uses Point-to-Point Protocol (PPP) to

carry data packets from your computer to the Globalstar Gateway.

3. Make sure “Idle timeout” is set to “Power Off.”

Note

Some ISPs automatically set the DNS information in Step 4. and

Step 5. If yours does, you can skip to Step 6. Ask your Service

Provider for details.

4. Make sure “Query DNS” is not checked, so that the “Primary DNS” and

“Secondary DNS” fields appear.

5. In the “Primary DNS” and “Secondary DNS” fields, enter the DNS

addresses assigned by your Service Provider or ISP.

Note

DNS address numbers in the illustration are examples only. Ask

your Service Provider or ISP for the numbers you should enter.

6. Make sure “IP Address” is checked (“Automatic”).

7. Tap

OK.