User guide

Macintosh Computers 67
Setting Up the Remote Access Protocol
1. In the
Options dialog, click the Protocol tab.
2. Under “Use protocol,” select “PPP.”
Globalstar data service uses Point-to-Point Protocol (PPP) to carry data
packets from your computer to the Globalstar Gateway. Asynchronous
connections with PPP data normally use PPP protocol also; however, in
some cases the network you wish to access might use something else,
such as Appletalk Remote Access Protocol.
3. Set “Connect automatically when starting TCP/IP applications” as
desired.
4. Select “Allow error correction and compression in modem.”
5. Select “Use TCP header compression.”
6. Set all other fields as desired, according to information from your SP.
(Probably none will be selected.)
7. Set preferences on the
Redialing and Connection tabs as desired.
8. Click
OK.
This activates the changes and closes the
Options dialog.
4
5
1
8
2
3
6
7