User guide

Windows Computers 55
5. Make sure the application is configured with the following settings:
6. Enter the telephone number you want to dial.
7. Enter the $QCPKND=1 command as part of the modem initialization
string.
8. Click
Dial.
To disconnect an asynchronous data connection
1. From the HyperTerminal pulldown menu, select
Call and Disconnect.
or
Click the
Disconnect button.
Setting: Value:
Data bits 8
Parity none
Stop bit 1
Baud rate Must match the baud rate on your Tri-Mode Phone (default:
38400). To check the baud rate on your Tri-Mode Phone, select
menu, then select Features > Data > Baud Rate.