User guide

36 Windows Computers
Selecting the COM Port
1. Select the Communications (COM) Port to which you have connected
the QUALCOMM data cable. This must be an RS-232-capable serial
COM port (COM1 is the standard).
2. Click
Next.
3. When the wizard says, “Your modem has been set up successfully,”
click
Finish to complete the modem installation.
Setting Modem Properties
1. In the Phone and Modem Options dialog, on the Modems tab, select
“Standard 19200 bps Modem.”
2. Click
Properties.
1
2
2
1