User guide

26 Windows Computers

4. In the Advanced Connection Settings dialog, make sure “Use flow

control” and “Hardware (RTS/CTS)” are selected.

5. In the

Extra settings field, type the AT (modem attention) command

appropriate to packet or asynchronous data, as shown below:

6. Click

OK to close the Advanced Communication Settings dialog.

7. On the

Options tab, make sure that none of the check boxes under

“Connection Control” are selected.

8. Under “Status control,” select “Display modem status.”

9. Click

OK to return to the Make New Connection dialog.

At a Glance: Data Differences

Data Type: AT Command:

Packet None (leave the field blank)

Asynchronous $QCPKND=2