User guide

18 Windows Computers
Selecting the COM Port
1. Select the Communications (COM) Port to which you have connected
the QUALCOMM data cable. This must be an RS-232-capable serial
COM port (COM1 is the standard).
Caution
Windows NT allows only one modem to be assigned to a given
COM port. If you connect your Globalstar phone on a port where
a modem has already been installed, Windows NT deletes the
setting for the previous modem.
If you need to install two modems under Windows NT, you can
either install them on two different COM ports or uninstall the
first modem and install the second on the same port.
2. Click Next.
3. When the wizard says, “Your modem has been set up successfully,”
click
Finish to complete the modem installation.
Setting Modem Properties
1. In the Modems Properties dialog, on the General tab, select the modem
you previously selected (“Standard 33600 bps Modem” or “Standard
19200 bps Modem”).
2. Click
Properties.
1
2