User guide

118 AT Commands
M[<value>] Monitor Speaker
Mode
[0-2] 0 ^
P Select Pulse Dialing - - ^
Q[<value>] Result Code
Suppression
[0-1] 0 0
T Select Tone Dialing - - ^
V[<value>] DCE Response
Format
[0-1] 0 1
X[<value>] Result Code Selection
Command
[0-4] 0 4
Z[<value>] Reset Default
Configuration
00^
&C[<value>] DCE RLSD (DCD)
Behavior
[0-2] 0 1
&D[<value>] DTE DTR Behavior [0-2] 0 2
&F[<value>] Set to QUALCOMM-
Defined Default
Configuration
00^
AAnswer Command---
A/
1
Repeat Last
Command
--^
D<dial string>[;] Dial Dial strings =
#*0123456789ABCD
String modifiers =
W,!@$TP
^^
H[<value>] Hook Control [0, 777] 0 ^
O[<value>] Return to Online
State
00^
S0{=<value>|?} Automatic Answer [0-255] - 0
S3{=<value>|?} Command Line
Termination
Character
[0-127] - 13
S4{=<value>|?} Response Format
Character
[0-127] - 10
S5{=<value>|?} Command Edit
Character
[0-127] - 8
S6{=<value>|?} Pause Before Blind
Dialing Time
[2-10] - 2
S7{=<value>|?} Connection
Completion Timeout
in seconds
[1-255] - 50
Table 2. Supported AT Commands (continued)
AT Command and Syntax AT Command
Description (brief)
Value Range No Value
Definition
Power ON
Definition