User Manual

6.
Remove the screws
(1)
. The card pops up
(2)
. Remove the card.
7.
Align the contact edge of the new PCI Express Mini Card with the corresponding socket
(1)
. Pivot the card until you can snap it into place. Secure the card with the two screws
(2)
.
8.
Connect the antenna cables to the new PCI Express Mini Card as shown in the
drawing.
Note:
Be sure to attach the red cable to the Main connector, and the blue cable to
the AUX connector.
9.
Attach the slot cover
(
1
)
and tighten the screw
(
2
)
.
2/3 ページInstalling and replacing the PCI Express Mini Card for wireless WAN connection
2009/06/26file://C:\TamaTemp\replpciw.htm\replpciw.htm