User's Manual

80-VF329-3 Rev. A 26 QUALCOMM Confidential and Proprietary
MAY CONTAIN U.S. EXPORT CONTROLLED INFORMATION
UNDP-1 Universal Notebook Data Platform User Guide Standards and Regulatory Compliance
3. To comply with FCC/IC regulations limiting both maximum RF output power and
human exposure to RF radiation, maximum antenna gain (including cable loss) must
not exceed:
Cellular band < 4 dBi
PCS band < 4 dBi
IMT band < TBD dBi
4. Independent UNDP-1 operation — the UNDP-1 platform must not be co-located or
jointly operated with any other transmitter or antenna within the host device.
5. A label with the following statement must be attached to the host end product:
This device contains Tx FCC ID: J9CUNDP-1
This equipment contains equipment certified under IC: TBD
6. The host end product must include a user manual that clearly defines operating
requirements and conditions that must be observed to ensure compliance with current
FCC/IC RF exposure guidelines.
7. The host end product must also pass the FCC Part 15 unintentional emission testing
requirement and be properly authorized per FCC Part 15.
For portable devices, in addition to the condition 3 through 6 described above, a separate
approval is required to satisfy the SAR requirements of FCC Part 2.1093 and IC RSS-102.