User's Manual

80-J7615-1 Rev. A MAY CONTAIN U.S. AND INTERNATIONAL EXPORT CONTROLLED INFORMATION 4-1
4
TT210 Installation Planning
Important Notes
Note
Refer to Chapter 3: General Wiring Guidelines, while planning your installation. The cable
chapter provides specific information on cables and wiring and should be considered during
the installation planning stage.
Note
Installers should be familiar with basic automotive wiring. It is recommended that installation
personnel complete the appropriate Qualcomm training courses prior to installing the TT210
system.
Regulatory Compliance Information
FCC/IC Compliance Statement
This device complies with part 15 of the FCC Rules. Operation is subject to the following two
conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including interference that may cause
undesired operation.
Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils
radio exempts de licence. L'exploitation est autorisée aux deux conditions suivantes :
(1) l'appareil ne doit pas produire de brouillage, et
(2) l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si le
brouillage est susceptible d'en compromettre le onctionnement.
Caution
This equipment should be installed and operated with minimum 20 cm between the radiator
and body. This transmitter must not be collocated or operating in conjunction with any other
antenna or transmitter unless authorized to do so by the FCC/IC.