User's Manual Part 2

80-J7615-1 Rev. A MAY CONTAIN U.S. AND INTERNATIONAL EXPORT CONTROLLED INFORMATION 14-29
Performing System Verification Trailer Connection/Disconnection
5. Is a refrigeration unit being monitored?
Note
If a refrigeration unit is detected, a snowflake will appear above the transmitter ID box.
• If yes, go to step 6.
• If no, go to step 7.
6. With the reefer turned on, check that the Refrigerator Stat # is incrementing on the
Trailer Management screen. This number should increment approximately once a
minute.
• If it is incrementing, go to step 7.
7. Disconnect the tractor from the trailer, leave the ignition ON, and wait for the disconnect
message as shown at left. (Allow up to 10 minutes.)
• When the disconnect message appears on the display screen, Trailer Tracks asset
management system verification is complete.
• If disconnect message does not appear (allow up to 10 minutes), call QES Customer
Support:
US: 800-541-7490
Canada: 800-863-9191
DRAFT