User's Manual Part 2

Getting the TT210 System Terminal ID MCP (110 and 200) Performing System Verification
14-28
MAY CONTAIN U.S.AND INTERNATIONAL EXPORT CONTROLLED INFORMATION 80-J7615-1 Rev. A
Getting the TT210 System Terminal ID MCP (110 and 200)
This section provides information on system verification for single trailer connections and
disconnections on the MCP.
Note
If the screen does not appear, call your company to have Trailer Tracks asset management
enabled. Have the MCP110 or MCP200 number ready when you call. The unit will need to be
added to the appropriate operational profile.
To activate the mobile communications terminal for the tethered asset management service
option and to enable Auto Connect, call the QES Customer Support. In the United States, call
800-541-7490; in Canada, call 800-863-9191.
Trailer Connection/Disconnection
1. Turn ignition ON. Verify that the TrailerTRACS asset management system is enabled. If
you can view the TrailerTRACS screen, TrailerTRACS asset management is enabled.
2. From the Home screen, touch the Trailer Management button to display the Trailer IDs
screen.
3. Connect the tractor to the trailer and leave the ignition ON. Connect the tractor 7-way
pigtail to the trailer. This powers the TrailerTRACS transmitter and initiates sending the
ID.
4. Verify a trailer is connected. When a trailer is connected, the TrailerTRACS Transmitter
ID number shows on the Trailer IDs screen. If multiple trailers are connected, the ID
from each transmitter will be displayed.
• For dry vans, if the Trailer ID appears, go to step 7.
• For reefer units, if the Trailer ID appears, go to step 5.
DRAFT