User's Manual Part 2

80-J7615-1 Rev. A MAY CONTAIN U.S. AND INTERNATIONAL EXPORT CONTROLLED INFORMATION 14-25
Performing System Verification Getting the TT210 System Terminal ID MCP (100)
Getting the TT210 System Terminal ID MCP (100)
This section provides information on system verification for single trailer connections and
disconnections on the MCP100.
Note
If the screen does not appear, call your company to have Trailer Tracks asset management
enabled. Have the MCP200 number ready when you call. The unit will need to be added to
the appropriate operational profile.
To activate the mobile communications terminal for the tethered asset management service
option and to enable Auto Connect, call the QES Customer Support. In the United States, call
800-541-7490; in Canada, call 800-863-9191.
Trailer Connection/Disconnection
1. Turn ignition ON. Verify that the Trailer Tracks asset management system is enabled. If
you can view the TrailerTRACS screen, Trailer Tracks asset management is enabled.
2. From the Home screen, touch the TrailerTRACS button to display the Trailer IDs
screen.
3. Connect the tractor to the trailer and leave the ignition ON. Connect the tractor 7-way
pigtail to the trailer. This powers the Trailer Tracks transmitter and initiates sending the
ID.
4. Verify a trailer is connected. When a trailer is connected, the Trailer Tracks Transmitter
ID number shows on the Trailer IDs screen. If multiple trailers are connected, the ID
from each transmitter will be displayed.
• For dry vans, if the Trailer ID appears, go to step 7.
• For reefer units, if the Trailer ID appears, go to step 5.
DRAFT