User's Manual Part 2

Getting the TT210 System Terminal ID (MVPc) Performing System Verification
14-22
MAY CONTAIN U.S.AND INTERNATIONAL EXPORT CONTROLLED INFORMATION 80-J7615-1 Rev. A
Getting the TT210 System Terminal ID (MVPc)
This section provides information on system verification for single trailer connections and
disconnections.
Enable Tethered Asset Management Service and Auto Connect
Note
If tethered asset management service screens are not available, then the tethered asset
management service option is not enabled.
To activate the mobile communications terminal for the tethered asset management service
option and to enable Auto Connect, call the QES Customer Support. In the United States, call
800-541-7490; in Canada, call 800-863-9191.
Trailer Connection/Disconnection
This section provides system verification information on trailer connections/disconnections.
Connection
1. Turn on the ignition.
2. Hook up the tractor to the trailer and connect the tractor’s 7-way pigtail.
3. Press the Menu key, then tap the Vehicle Info touch button, and then tap the tethered
asset management service screen button, the tethered asset management service ID
screen appears.
If the tethered asset management service screen does not appear,
call the QES
Customer Support. In the United States, call 800-541-7490; in Canada, call
800-863-9191.
If “Hit ‘C’ to connect” (see illustration below) appears, this means Auto Connect is not
enabled. Call the QES Customer Support to enable Auto Connect. In the United States,
call 800-541-7490; in Canada, call 800-863-9191. Have the mobile communications
terminal serial number (unit address) available when you call.
DRAFT