User's Manual Part 2

Trailer Connection/Disconnection Performing System Verification
14-20
MAY CONTAIN U.S.AND INTERNATIONAL EXPORT CONTROLLED INFORMATION 80-J7615-1 Rev. A
After the trailer is connected and the TrailerTRACS system transmitter sends its ID to
the mobile communications terminal, the trailer ID is updated on the EDU as shown in
the following screen.
Disconnection
1. Remove 7-way pigtail.
2. Leave ignition on.
3. Wait up to five minutes for disconnect message.
A disconnect message is sent when the tractor’s ignition is on and there has been no
signal from the tethered transmitter for a preset time period. This will usually occur
within five minutes.
READ
NEXT
READ
PREV
REPLY
CREATE
MSG
SEND
USE ↑ ( (↓) TO MOVE TO PREV(NEXT)SCREEN
TRAILERTRACS ID#'s
CONNECTED: 1234
READ
NEXT
READ
PREV
REPLY
CREATE
MSG
SEND
USE ↑ ( (↓) TO MOVE TO PREV(NEXT)SCREEN
WARNING: A TRAILER HAS DISCONNECTED
(ANY FUNCTION KEY EXITS.)
DRAFT