User's Manual Part 2

What Is TT210 System Verification? Performing System Verification
14-2
MAY CONTAIN U.S.AND INTERNATIONAL EXPORT CONTROLLED INFORMATION 80-J7615-1 Rev. A
What Is TT210 System Verification?
The TT210 system verification is a functional system check that should be performed after
installation of the TT210 system and after service to verify the TT210 system is operating
properly.
The chapters following this System Verification chapter provide the diagnostics steps
necessary to resolve any problem that appears during the system verification.
TT210 System Verification
Proper system verification requires the Configuration Tool software running on a Windows
based laptop, netbook, or PC. This software is available online at Qualcomm’s iQ web site,
from your Qualcomm representative, or by calling QES Customer Support at (800-541-7490).
The trailer ID may be assigned or changed from the Qualcomm Web Portal. In addition, some
operating parameters may be checked. It is not recommended to use the Portal for system
verification because not all of the items that should be checked are available for viewing.
DRAFT