User's Manual Part 2

Roll Door Magnet Installation Installing the Roll Door Sensor
12-10
MAY CONTAIN U.S. AND INTERNATIONAL EXPORT CONTROLLED INFORMATION 80-J7615-1 Rev. A
5. Close the trailer door and ensure the sensor switch and magnet are aligned. Ensure
also there is some clearance between the sensor switch and the magnet.
Carefully close the roll-up door,
and check to be sure there
is some clearance between
the sensor and the magnet.
06AAA_212
Magnet
SENSOR
06AAA_207
Roll-up
Door
2.0"min.
0.75"
DRAFT