User's Manual Part 2

Swing Door Sensor Placement Installing the Swing Door Sensor
11-10
MAY CONTAIN U.S. AND INTERNATIONAL EXPORT CONTROLLED INFORMATION 80-J7615-1 Rev. A
Swing Door Sensor Placement
1. With the door open, use a felt-tip pen to mark a horizontal reference line on the door
post in the area where the sensor will be located. It is recommended you locate the
swing door sensor 2" above the bottom right side door hinge area where the door seal
ends.
05AAA_236A
approx. 2.00"
Mark the post 2" above the lower right door hinge with the door open
on the panel that faces inside when the door is open.
DRAFT