User's Manual Part 1

Mount Installation Installing the TT210 Terminal on Reefers

8-8

MAY CONTAIN U.S. AND INTERNATIONAL EXPORT CONTROLLED INFORMATION 80-J7615-1 Rev. A

1. On the outside of the trailer, locate an appropriate area in the top channel where the

TT210 reefer mount will be installed. Make sure it’s away from any sources of heat

(muffler, exhaust air, etc.)

Note: Avoid installing the TT210 mount near air and/or electrical lines.

2. Position the mount in the top rail channel so that it is level. Hold the mount into the

position and drill one of the self-drilling mounting screws. Drill the rest of the self-drilling

mounting screws.

3. Attach the unit to the mount with six rivets. Holes are provided in mount.

10AAA_37

Reefer Mount

Self Drilling Screws

Top Channel

6-Rivits

Rivits

TT210 Terminal

Wiring wraps

around bracket

Reefer Unit

DRAFT