User's Manual Part 1

80-J7615-1 Rev. A MAY CONTAIN U.S. AND INTERNATIONAL EXPORT CONTROLLED INFORMATION 6-9
Installing the TT210 Terminal on Plate Nose Trailers Installation
15. Configure or pair the terminal to the proper trailer ID.
a. Wake up the terminal with the key fob or 7-way power.
b. Using the configuration tool, go into the configure screen and enter the trailer ID.
16. Close the terminal and make sure it is sealed.
a. Ensure gasket is properly seated.
b. Attach the unit cover.
17. Perform system verification. See Chapter 14: Performing System Verification.
DRAFT