User's Manual Part 1

Installation Installing the TT210 Terminal on Dry Vans
5-10
MAY CONTAIN U.S. AND INTERNATIONAL EXPORT CONTROLLED INFORMATION 80-J7615-1 Rev. A
21. Close the terminal and make sure it is sealed.
a. Ensure gasket is properly seated.
b. Attach the unit cover.
22. Configure or pair the terminal to the proper trailer ID.
a. Wake up the terminal with the key fob or 7-way power.
b. Using the configuration tool, go into the configure screen and enter the trailer ID.
23. Perform system verification. See Chapter 14: Performing System Verification.
10AAA_027A
Battery Pack
Battery
Compartment
Open
DRAFT