User's Manual Part 1

80-J7615-1 Rev. A MAY CONTAIN U.S. AND INTERNATIONAL EXPORT CONTROLLED INFORMATION 3-7
General Wiring Guidelines Crimping
Strain Relief
If there is sufficient wire available for the Four-Finger Wrap Method:
1. Wrap a wire around four fingers of a hand, one full loop, so that the wire loop is longer
than the wrapped butt splice.
2. Pinch the loop tightly and center it against the wrapped butt splice.
3. Secure the wires together and place 4" tie wraps at the outside ends of the butt splice.
4. Cinch the tie wraps tight and cut them flush to the lock head.
04AAA_24a
Place tie wraps
at outside ends of
butt splice.
04AAA_23a
DRAFT