User's Manual Part 1

80-J7615-1 Rev. A MAY CONTAIN U.S. AND INTERNATIONAL EXPORT CONTROLLED INFORMATION 2-9
TT210 System Component Overview TT210 Door Sensor
TT210 Door Sensor
There are two door sensor options: roll door and swing door. The trailer/container door
sensor is connected to the TT210 system terminal through the power/accessory cable and
optimizes the TT210 system by providing trailer/container door status.
The door sensor is a magnetic switch that monitors a door’s “state” (either open or closed).
There are multiple modes of operation that door events can be programmed for.
The swing door sensor consists of a switch and a trigger magnet. See Chapter 11: Installing
the Swing Door Sensor for installation procedures.
The roll door sensor consists of a much larger magnet and door sensor switch. See Chapter
12: Installing the Roll Door Sensor for installation procedures.
Auxiliary Sensor
The AUX input on the TT210 power/accessory cable can be used for auxiliary third-party
accessories. See Chapter 13: Installing the Auxiliary Sensor for more information.
Door Sensor
Magnet
05AAA_261
85 ft. cable with
convoluted tubing
Swing Doors Roll Door
Magnet
Door Sensor
DRAFT