User's Manual Part 1

The Installation Hardware TT210 System Component Overview
2-2
MAY CONTAIN U.S. AND INTERNATIONAL EXPORT CONTROLLED INFORMATION 80-J7615-1 Rev. A
The Installation Hardware
The TT210 system installation has three basic configurations:
• Dry van (7-way power, optional cargo and door sensors)
• Reefer (reefer connection, 7-way power, optional battery, optional door sensors)
• Container (solar power only, no 7-way, optional cargo and door sensors)
The TT210 terminal contains an integrated battery pack and antenna. There is an optional
TT210 system power/accessory cable assembly. Refer to Chapter 10: Installing the TT210
Cable.
Also available for installation are the following optional sensor-style accessories:
• TT210 system cargo sensor and mount
If the cargo sensor will be installed in the trailer/container, refer to Chapter 10: Installing
the Cargo Sensor.
• TT210 system swing door sensor with cable assembly
Refer to Chapter 11: Installing the Swing Door Sensor.
• TT210 system roll door sensor with cable assembly
Refer to Chapter 12: Installing the Roll Door Sensor.
• Auxiliary sensor
An auxiliary wire connector on the TT210 system power/accessory cable assembly allows
for an optional third-party device. Refer to Chapter 13: Installing the Auxiliary Sensor.
DRAFT