User's Manual

Getting the TT210 System Terminal ID (EDU) Performing System Verification
15-24
MAY CONTAIN U.S.AND INTERNATIONAL EXPORT CONTROLLED INFORMATION80-J7615-1
Rev. A
Getting the TT210 System Terminal ID (EDU)
This section provides information on system verification for single trailer connections and
disconnections.
Enable the Tethered Asset Management Service and Auto Connect
Note
If tethered asset management service screens are not available, then the tethered asset
management service option is not enabled.
To activate the mobile communications terminal for the tethered asset management service
option and to enable Auto Connect, call the QES Customer Support. In the United States, call
800-541-7490; in Canada, call 800-863-9191.
Trailer Connection/Disconnection
This section provides system verification information on trailer connections/disconnections.
Connection
1. Turn on the ignition.
2. Hook up the tractor to the trailer and connect the tractor’s 7-way pigtail. Press the
ENTER key
.
3. Press the VIEW STATUS key to display the View Status screen.
READ
NEXT
READ
PREV
REPLY
CREATE
MSG
SEND
USE ( ) ( ) TO MOVE TO PREV(NEXT)SCREEN
OMNITRACS 4/22/06 10:23:21 CST
-------------------------------------------------------------
DRIVER: UNIDENTIFIED UNREAD MESSAGES: 0
STATUS: GOOD MSGS BEING SENT: 0
PRESS +, - TO CHANGE TIME ZONE: GMT
DRAFT