User's Manual

80-J7615-1 Rev. A MAY CONTAIN U.S. AND INTERNATIONAL EXPORT CONTROLLED INFORMATION 15-17
Performing System Verification Getting the TT210 System Terminal ID Using the 7-way Diagnostic Tool
Getting the TT210 System Terminal ID Using the 7-way Diagnostic Tool
Complete the following procedure to launch the TT210 system 7-way diagnostic tool software
on your handheld device.
To Launch the TT210 System 7-way Diagnostic Tool Software
1. Connect the TT210 system 7-way adaptor to the handheld device via the handheld’s
serial cable.
2. Tap the Home or Applications icon on the handheld device and cycle through the
application categories to locate the 7-way diagnostic tool software icon.
3. Tap the 7-Way Tool icon.
4. Tap Connect.
The TT210 system 7-way diagnostic tool software connects to the terminal via the
trailer’s 7-way receptacle and reads the information from the terminal.
7-way tool software icon ——
DRAFT