User's Manual

ManualsBrandsQualcomm Technologies ManualsElectronicsTrailer Tracks Service

80-J7615-1 Rev. A MAY CONTAIN U.S. AND INTERNATIONAL EXPORT CONTROLLED INFORMATION 15-3

Performing System Verification Diagnostic Flowchart—TT210 System Verification

Diagnostic Flowchart—TT210 System Verification

If installed,

does the cargo sensor

toggle between Loading

and Unloading?

If installed,

does the door sensor

toggle between Open

and Closing?

If an AUX

sensor is installed,

does it toggle

between different

states?

Ye s

Step 6

Step 7

Step 8

Step 9

Ye s

Go to chapter 21;

Changing the

Trailer ID.

Go to chapter 22;

Cargo Sensor.

Go to chapter 23;

Door Sensor.

Go to chapter 24;

AUX Sensor.

Go to chapter 25;

GPS No Fix.

Go to chapter 20;

FST Will Not

Connect.

Step 5

Step 4

Step 3

Step 2

Is the trailer ID

displayed correctly?

If the trailer ID has not

been entered, the FST

software will prompt you to

do so. Enter the trailer ID.

Tap the

[connect] icon

Did it connect?

Connect PDA with FST software

to 9-pin diagnostic connector.

Turn on PDA and launch

T2 FST software.

In the

GPS/Ant

field does the FST

indicate 2D or

3D Fix?

Ensure all

electrical connections

are made.

Step 1

Ye s

Go to chapter 28;

Battery.

Does

the battery

indicate 3.7 volts

or higher?

Step 10

Ye s

05AAA_050a

Continue with Step 13

on the following page.

Ensure neither

7-way power or solar

power is applied.

Step 11

Step 12

If this installation includes

solar power (i.e., solar or solar

with 7-way), go to step 13. If this

installation does not include solar

power, go to step 15.

DRAFT