User's Manual

What Is TT210 System Verification? Performing System Verification
15-2
MAY CONTAIN U.S.AND INTERNATIONAL EXPORT CONTROLLED INFORMATION80-J7615-1
Rev. A
What Is TT210 System Verification?
The TT210 system verification is a functional system check that should be performed after
installation of the TT210 system and after service to verify the TT210 system is operating
properly.
The chapters following this System Verification chapter provide the diagnostics steps
necessary to resolve any problem that appears during the system verification.
Note
There are two ways to configure the TT210 system, either by using the Configuration tool
software or by using the Trailer Tracks software.
TT210 System Verification
The flowchart on the following page represents a step-by-step guide to the verification
procedures. It is important that you read the procedure on the pages following the flowchart
for detailed information about this process. If, at any time, you reach a step and cannot
proceed, call QES Customer Support at (800-541-7490).
DRAFT