User's Manual

80-J7615-1 Rev. A MAY CONTAIN U.S. AND INTERNATIONAL EXPORT CONTROLLED INFORMATION 11-5
Installing the Cargo Sensor Installing the Cargo Sensor Using 3" or 1" Pan Mount
4. Place the cargo mount installation template as high up as practical between the vertical
support rails.
5. Secure the template with two self-drilling screws through holes in the handle.
6. Using the template as a guide, drill the 18 stud holes using a 3/8" drill.
7. Trace the inside of the template using a felt-tip pen.
8. Drill 1/4” pilot holes in the four inside corners of the template.
10AAA_02
10AAA_04
Trace the inside of the template
DRAFT