User's Manual

Swing Door Sensor Placement Installing the Swing Door Sensor
12-4
MAY CONTAIN U.S. AND INTERNATIONAL EXPORT CONTROLLED INFORMATION80-J7615-1
Rev. A
Swing Door Sensor Placement
1. With the door open, use a felt-tip pen to mark a horizontal reference line on the door
post in the area where the sensor will be located. Qualcomm recommends you locate
the swing door sensor 2" above the bottom right side door hinge area where the door
seal ends.
2. With the door closed, mark a vertical reference line on the door and door post so the
sensor and magnet can be easily aligned.
05AAA_236A
approx. 2.00"
Mark the post 2" above the lower right door hinge with the door open
on the panel that faces inside when the door is open.
Trace the edge
of the door onto
the door post.
Approximately an 18"
high vertical line.
Cargo door closed
Door Post
05AAA_236B
DRAFT