User's Manual
Mount Installation Installing the TT210 Terminal on Reefers
8-8
MAY CONTAIN U.S. AND INTERNATIONAL EXPORT CONTROLLED INFORMATION80-J7615-1
Rev. A
Note: Avoid installing the TT210 mount near air and/or electrical lines.
2. Position the mount in the top rail channel so that it is level. Hold the mount into the
position and drill one of the self-drilling mounting screws. Drill the rest of the self-drilling
mounting screws.
3. Attach the unit to the mount with six rivets. Holes are provided in mount.
4. Route the TT210 power/accessory cable from the mount to the inside of the reefer on
the right side towards the 7-way receptacle.
10AAA_37
Reefer Mount
Reefer Mount
Self Drilling Screws
To p Channel
6-Rivits
Rivits
TT210 Terminal
TT210 Terminal
Wiring wraps
around bracket
Reefer Unit
DRAFT