User's Manual

Installation Installing the TT210 Terminal on Dry Vans
5-6
MAY CONTAIN U.S. AND INTERNATIONAL EXPORT CONTROLLED INFORMATION80-J7615-1
Rev. A
10. drawing shoing white markings on top of connector.??
11. Remove the 7-way receptacle cover from outside the trailer.
12. Drill a 7/8" hole for the 7-way cable in or by the 7-way.
13. Run the 7-way cable from the 7/8” hole at the TT210 down to the 7-way hole.
a. Fish the cable down to the 7-way from the terminal using a fish tape from below or
a hook wire at the 7-way.
b. Install the supplied non-split grommet in the hole.
DRAFT