User's Manual
Crimping General Wiring Guidelines
3-8
MAY CONTAIN U.S. AND INTERNATIONAL EXPORT CONTROLLED INFORMATION80-J7615-1
Rev. A
Caution
Failure to cut the tie wraps flush to the lock head can result in minor injury.
5. Firmly tug on the butt-spliced wire connection to make sure the tie wraps do not pull
loose.
If there is NOT sufficient wire available for the Four-Finger Wrap Method:
1. Securely tie wrap the butt spliced wires to existing wires or harnesses in the nearby
vicinity.
Note
It is good practice to tie wrap the newly installed wires to existing wires approximately
every 15"–18".
04AAA_25a
Cut tie wrap
flush with lock head.
04AAA_26
a
DRAFT