Installation Guide

80-53184-1 Rev. A QUALCOMM Proprietary 1
Terrestrial Mobile Communications Terminal
Installation Instructions
Product Overview
The Terrestrial Mobile Communications Terminal (TMCT) is the complete cost-effective mobile
information management solution for vehicles operating in metropolitan areas and major highway
corridors. The system provides two-way communications, automatic position reports, and collects and
records powerful management data.
Should questions arise while performing these procedures, please contact the QUALCOMM Wireless
Business Solutions (QWBS) Hotline at [phone] for technical support.
Tools and Supplies Needed for Installation
The following tools and supplies are recommended for performing installations. Those marked with a
bullet (•) are considered the essential tools and supplies required to perform an installation. Tools other
than these may be required to facilitate certain installations and maintenance.
Wrenches Misc. Tools
• Standard Combination Wrench Set • Diagonal Wire Cutters
Adjustable Wrench • Wire Strippers
• 3/16” Hex (Allen) Wrench • Butt Splice Crimping Tool
Ratchet/Sockets
• Level
• 3/8” Drive Standard Deep Well Socket Set Vise Grips
1/4” Drive Standard Deep Well Socket Set • Volt/ohm Meter
1/4” Ratchet Hacksaw
3/8” Ratchet Hammer
3/8” Drive Socket Set Utility Knife
9/16” Deep Socket Files (flat, round)
Screwdrivers
Channel Locks
• Phillips #2 Straight Awl
Power Screwdriver (speeds installation time) Measuring Tape
Slotted Screwdriver
Torx Bit Set
Misc. Supplies