User Manual
Table Of Contents
- SWOC-T Integrator’s Manual
- Contents
- 1 Introduction
- 2 Applicable Module
- 3 Available Global Modular Approvals
- 4 Additional Regulatory Conformance Testing and/or Submissions Required by the Integrator
- 5 Compliant and Allowable Tx Power Settings Programmed into EEPROM
- 6 Allowable Antennas to Use with the Radio Module
- 7 Label Information
- 8 Required Regulatory Wording for User Manual and Installation Manual
80-P8867-5 Rev. B Confidential and Proprietary – Qualcomm Technologies, Inc. 7
MAY CONTAIN U.S. AND INTERNATIONAL EXPORT CONTROLLED INFORMATION
4 Additional Regulatory Conformance
Testing and/or Submissions Required by
the Integrator
The global modular certifications apply to radio conformance for the Module only.
The OEM integrator is responsible for additional system-level EMI/EMC and product safety
testing and certification that applies in the U.S. and other countries to the host system containing
the Module. This includes, but is not limited to, Federal Communications Commission (FCC)
Part 15 Class B Digital Emissions, China CCC, Taiwan BSMI, Korea KC, ETSI EN 301 489-17,
and others.
These system-level EMC tests are to be done with the Module installed and included in the scope
of the submission.
Modular radio certification is not possible in some countries. For such countries, OEM integrators
must ensure radio certification for the end system is obtained, before placing the product on the
market. A current list of applicable countries can be provided by Qualcomm.
Contact your Qualcomm account representative if you have questions about the additional
regulatory conformance testing and/or related submissions.