User Manual
Table Of Contents
- SWOC-T Integrator’s Manual
- Contents
- 1 Introduction
- 2 Applicable Module
- 3 Available Global Modular Approvals
- 4 Additional Regulatory Conformance Testing and/or Submissions Required by the Integrator
- 5 Compliant and Allowable Tx Power Settings Programmed into EEPROM
- 6 Allowable Antennas to Use with the Radio Module
- 7 Label Information
- 8 Required Regulatory Wording for User Manual and Installation Manual
80-P8867-5 Rev. B Confidential and Proprietary – Qualcomm Technologies, Inc. 4
MAY CONTAIN U.S. AND INTERNATIONAL EXPORT CONTROLLED INFORMATION
1 Introduction
This document describes the steps that the OEM integrator must follow when designing and
manufacturing a system utilizing a Qualcomm
®
design radio SWOC-T module (referred to in this
document as the “Module”).
Failure to follow the instructions in this document may invalidate the FCC certification and
authorization of the Module for use in the U.S. and in other countries.
The Qualcomm modular certifications described in this document apply only to radio
conformance for the Module. The OEM integrator is responsible for all system-level EMI/EMC
and product safety testing and certification that applies to the host system in the U.S. and other
countries where the system will be marketed or sold.