User Manual
Table Of Contents
- SWOC-T Integrator’s Manual
- Contents
- 1 Introduction
- 2 Applicable Module
- 3 Available Global Modular Approvals
- 4 Additional Regulatory Conformance Testing and/or Submissions Required by the Integrator
- 5 Compliant and Allowable Tx Power Settings Programmed into EEPROM
- 6 Allowable Antennas to Use with the Radio Module
- 7 Label Information
- 8 Required Regulatory Wording for User Manual and Installation Manual
80-P8867-5 Rev. B Confidential and Proprietary – Qualcomm Technologies, Inc. 10
MAY CONTAIN U.S. AND INTERNATIONAL EXPORT CONTROLLED INFORMATION
7 Label Information
The SWOC-T module is integrated with a display screen and supports the e-label per FCC
KDB784748 D02 requirements:
\https://apps.fcc.gov/kdb/GetAttachment.html?id=KvMvDHtHyDtJ4FB3x0mEwA%3D%3D.
The SWOC-T e-label provides regulatory information. Qualcomm offers software that allows
integration of the Module to fully comply with the FCC e-label requirements.
Regulatory Information:
FCC ID is J9CSWOC-T
IC: 2723A-SWOCT
Model Name: SWOC-T
Integrators must be aware of the following FCC e-labeling requirements for the end products to
ensure absolute compliance.
For access to the required information on the e-label:
1. Users must be able to access the information without requiring special access codes or
permissions and, in all cases, the information must be accessible in no more than three steps
in a device’s menu.
2. Devices must not require special accessories or supplemental plugins (e.g., the installation of
a SIM/USIM card) to access the information.
3. Users must be provided specific instructions on how to access the information. The
instructions must be included in the user’s manual, operating instructions, insert in the
packaging materials, or other similar means. Alternately, the access information may be
available on the product-related website with instructions on how to access the website
provided in the packaging material.