User's Manual

QDBS–Broadband Hardware
- 31 -
QUALCOMM Confidential and Proprietary
MAY CONTAIN U.S. EXPORT CONTROLLED INFORMATION
80-D9001-1 Rev. A
1
2
3
Figure 10: RNC case (rear view)
4.3.5. Ethernet switch
The Ethernet switch denoted with in Figure 10 is used for Ethernet connectivity and LAN IP
communications. The Ethernet has sixteen 10/100 Mbps auto-speed Ethernet ports and built-in link
and activity lights. The switch is accessed from the rear of the RAN.
4
5
6
7
8
9
10
11
12
13
Figure 11: Network CIP 14
4.3.6. Connector Interface Panel
The Connector Interface Panel (CIP) denoted with in Figure 10 is a cable pass-through panel
designed to make connecting and disconnecting the various serial and Ethernet connections in the
transit cases easier. The CIP is located in the rear of the transit case. The Network CIP also has
connections for the IP network Ethernet, the backhaul to the Radio, and convenience outlets.