User's Manual

QDBS–Broadband Hardware
- 29 -
QUALCOMM Confidential and Proprietary
MAY CONTAIN U.S. EXPORT CONTROLLED INFORMATION
80-D9001-1 Rev. A
1 4.2.6. RF antennas
WARNING: When operating the QDBS–Broadband in pico-cell mode, install a 30 dB
attenuator between the transmit port of the RAN CIP and the transmit antenna.
Failure to install the attenuator may result in dangerous RF exposure and bodily harm.
2
3
4
5
6
7
8
9
10
11
12
13
14
15
For pico-cell operation, two small magnetic-mounted wire-whip RF antennas (one for transmitting
and one for receiving), are provided with the QDBS–Broadband. Macro antennas are an optional
QDBS–Broadband accessory.
4.3. Network Case components
Figure 9 identifies the components of the Network Case. Each component is described in the
following subsections.
Figure 9: Major components of the Network Case (front view)
4.3.1. Authentication, Authorization, and Accounting (AAA) Server
The AAA sever is an optional component of the QDBS-Broadband. The AAA is used for access
control whereby the authentication function identifies the user, the authorization function