User's Manual

- 9 -
QUALCOMM Confidential and Proprietary
MAY CONTAIN U.S. EXPORT CONTROLLED INFORMATION
80-D9001-1 Rev. A
1
2
3
4
5
6
7
8
9
10
11
12
13
14
Section 1
Introduction
This document describes the procedures necessary to set up a pre-configured QUALCOMM
Deployable Base Station–Broadband (QDBS™–Broadband). Operation and configuration of the
QDBS–Broadband is described in the QDBS Software User Guide, 80-D8610, Rev. A. QDBS-
Broadband users must receive QUALCOMM training before they can operate a QDBS–Broadband.
The QDBS–Broadband transmits potentially harmful RF energy. All users shall familiarize
themselves with all warnings, cautions, and safety notices placarded on equipment before setting up
or operating a QDBS-Broadband.
1.1. Intended audience
This Hardware Setup Guide is intended for trained operators, technicians, engineers, and other
personnel responsible for performing QDBS–Broadband hardware setup and maintenance. Please
refer to the product Terms and Conditions for additional information regarding rights and
obligations when using the QDBS–Broadband.
1.2. In this document
The following table identifies and describes topics covered in this document.
Section Description
1 Describes the document, its intended audience, purpose, and conventions,
and provides definitions for related terminology and reference to documents
for additional information.
2 Provides an overview of the QDBS–Broadband components.
3 Provides procedures and instructions for unpacking the QDBS–Broadband
from shipping containers.
4 Provides a detailed description of each QDBS–Broadband component.
5 Provides procedures and instructions for setting up a QDBS–Broadband.
6 Provides procedures and instructions for setting up the QDBS–Broadband
remote Radio.
7 Provides procedures and instructions setting up a QDBS-Cellular and
QDBS–Broadband overlay.