User's Manual


84
Customizing Your Phone
4
Enter the Lock Code PIN and press the Select ( ) key.
"
If the correct Lock Code PIN is entered, the Access menu is displayed.
"
If an incorrect Lock Code PIN is entered, you must correctly reenter this
PIN. If an incorrect Lock Code PIN is entered too many times, the Lock
Code is disabled. After the Lock Code has been disabled, you can re-
enable it by entering the PUK (Personal Unblocking Key). If the correct
PUK is entered, you will again be able to enter the Lock Code.
To Erase All Contacts in the Contacts List
1
Open the Access menu using the procedure described in the previous section.
2
From the Access menu, select
Erase All Contacts
.
3
Press the Select ( ) key to select [Yes]. This confirms erasing the contacts.
All the contacts stored in the Contacts list are erased.
To Erase All Recent Calls
1
Open the Access menu using the procedure described in “To Open the Access
Menu” on page 83.
2
From the Access menu, select
Erase All Recent Call List
.
3
Press the Select ( ) key to select [Yes]. This confirms erasing the recent calls.
The recent calls stored in all three Recent Call lists are erased.
Caution
If an incorrect PUK is entered too many times your phone is disabled, and
must be returned to your Terminal Administrator in order to be re-enabled.