User's Manual


Standard Settings
79
4
Select
Volume
to set the volume for each audible output. Select one of the following
outputs, and scroll left or right to adjust the volume for this output:
"
Ringer
"
Earpiece
"
Key Beep
"
Speaker
5
Select
Alert Type
to set the alerts for the phone:
"
Off:
alerts will appear on the phone’s screen (no sound or vibration)
"
Ringer:
phone will ring during the entire alert
"
Vibration:
phone will vibrate during the entire alert
"
Vibe+Ringer:
phone will vibrate during the first half of the alert, and ring
during the second half of the alert
6
Select
Ringer Type
to choose a ringer for incoming calls. There are 15 ringer types
stored in your phone.
7
Select
Key Beep
to choose which sound the phone keys make:
"
Tones
"
Clicks
8
Select
Key Tone Length
to choose the duration of the key tones (the Key Beep
setting above must be set to Tones):
"
Normal:
standard key tone duration
"
Long:
key tone lasts as long as key is held down
To Configure the Phone’s Display
From the Display menu, you can configure the backlighting, banner, contrast and time
format for your phone. Perform the following procedure to configure the phone’s display:
1
From the Home screen, press the Select ( ) key.
2
Press the Select ( ) key again to select the
Settings
tab.
3
From the Settings menu, select
Display
.
The Display menu appears.
Note
You can also turn the volume of the Ringer and Key Beep off.
Note
Any time external power is applied to the phone (e.g., the Travel charger), the
Ringer is active regardless of the Alert Type setting.