User's Manual


78
Customizing Your Phone
4
Select one of the following options:
"
Normal:
to enable all audio alerts
"
Vibe Only:
to disable all audio alerts and replace them with vibratory alerts
"
Lights Only:
to disable all audio and vibratory alerts
To Lock/Unlock the Keypad
Using the Auto KeyGuard option, you can lock the keypad to prevent accidental key
presses while the Home screen is displayed. Perform the following procedure to lock the
keypad:
1
From the Home screen, press the Select ( ) key.
2
Press the Select ( ) key again to select the
Settings
tab.
3
From the Settings menu, select
Auto Key Guard
.
4
Select one of the following options:
"
On:
to lock the keypad
"
Off:
to disable the keyguard
"
30 Sec:
to lock the keypad after 30 seconds of idle time
"
2 mins:
to lock the keypad after 2 minutes of idle time
"
5 mins:
to lock the keypad after 5 minutes of idle time
5
To unlock the keypad, press ‘123’.
To Configure the Phone’s Sound
From the Sound menu, you can configure the volume, alert type, ringer type, key beep
and key tone length for your phone. Perform the following procedure to configure the
phone’s sound:
1
From the Home screen, press the Select ( ) key.
2
Press the Select ( ) key again to select the
Settings
tab.
3
From the Settings menu, select
Sound
.
The Sound menu appears.
Note
Silencing audible alerts will not silence in-call alerts.
This setting does not affect backlighting.
Note
Auto KeyGuard can also be activated by pressing and holding the Clear ( )
key from the Home screen.
Only the Send/Talk ( ) key can answer a call while the Auto KeyGuard is
active; however, all keys are active when you are in a call.