User's Manual


45
In-call Features
In-call features are actions performed while you are involved in one or more calls.
In this section, you will learn to
!
Transition between clear and secure calls (page 45)
!
Make three-way calls (page 46)
!
Forward clear calls (page 46)
!
Transition between clear voice calls and secure data calls (page 47)
Transitioning Between Clear/Secure Calls
You can transition between clear and secure
during
a call for phones that are strapped
Traditional or Auto-secure. If you have established a clear call connection, you can
transition to a secure one; if you have established a secure call connection, you can
transition to a clear one.
To Transition from a Clear Call to a Secure Call
You can only transition clear calls to secure calls when both phones are QSec phones.
1
Perform one of the following actions.
"
From the screen keys displayed during a clear call, select [Go Secure
Voice].
"
Press or press and hold the Send/Talk ( ) key, depending on your
phone’s strapping (see “Determining Your Phone’s Strapping” on
page 21). This action is similar to initiating a secure call.
2
When the secure LED is lit, enter your secure user PIN (if prompted to do so).
The person you are talking to may also be prompted to enter a PIN. Upon
transitioning to a secure call, your phone plays a tone to alert you that a secure call
is in progress. See “Making Secure Calls” on page 31 for more information on the
behavior of your phone during a secure call.
Note
Due to the secure features of your phone, it may take a few minutes to transition
between call types.
Note
If you are receiving a request to transition the call from clear to secure, refer to
“Receiving Secure Calls” on page 33.