User's Manual


Viewing Access Control Settings
23
To View Your Access Control Settings
1
From the Home screen, press the Select ( ) key.
2
Scroll to the
Security
tab, and press the Select ( ) key.
The Security menu appears.
3
Select
Access Control
.
The Access Control settings are displayed on the screen.
4
Using the Up and Down navigation keys, scroll to the desired Access Control setting
and press the Select ( ) key twice to select [OK].
While viewing the Access Control settings, a check mark to the left of a setting
indicates the phone’s current configuration. The following table describes your
phone’s Access Control settings. Factory-default settings are identified by a
#
.
Name Setting Description
Security Strap Secure-only You can make secure calls and emergency calls
(911) only.
Auto-secure
!
You can make
secure
calls by pressing the
Send/Talk ( ) key.
!
You can make
clear
calls by pressing and
holding the Send/Talk ( ) key for
approximately 1 second.
#
Traditional
!
You can make
clear
calls by pressing the Send/
Talk ( ) key.
!
You can make
secure
calls by pressing and
holding the Send/Talk ( ) key for
approximately 1 second.
User PIN Change Enabled You can change your user PIN.
#
Disabled You cannot change your user PIN.
Secure Voice
#
Enabled You can make secure voice calls.
Disabled You cannot make secure voice calls.
Secure Data
#
Enabled You can make secure data calls.
Disabled You cannot make secure data calls.
Clear Data
#
Enabled You can make clear data calls.
This setting is overridden by the Secure-only strap.
Disabled You cannot make clear data calls.