User Instructions
Table Of Contents
- 1 Introduction
- 2 Applicable Module
- 3 Available Global Modular Approvals from Qualcomm Technologies, Inc.
- 4 Additional Regulatory Conformance Testing and/or Submissions Required by the Integrator
- 5 Compliant/Allowable Transmit Power
- 6 Allowable Antennas to Use with the Radio Module
- 7 Antenna Placement Inside the Host System and RF Safety
- 8 Simultaneous Transmission with Other Integrated or Plug-In Radios
- 9 Module May Not Be Installed by End Users
- 10 Required Labeling on the Outside of the Host
- 11 Required Labeling on the Module
- 12 Required Regulatory Wording for User Manual/Installation Manual
- 13 OEM Integrator Checklist
80-KA570-12 Rev. B MAY CONTAIN U.S. AND INTERNATIONAL EXPORT CONTROLLED INFORMATION 9
4 Additional Regulatory Conformance
Testing and/or Submissions Required by
the Integrator
The global modular certifications apply to radio conformance for the Module only.
The other equipment manufacturer (OEM) integrator is responsible for additional system-level
EMI/EMC and product safety testing and certification that applies in the U.S. and other countries
to the host system containing the Module. This includes, but is not limited to, Federal
Communications Commission (FCC) Part 15 Class B Digital Emissions, Japan, Korea KC, ETSI
EN 301 489-17 and others.
These system-level EMC tests are to be done with the Module installed and should be included in
the scope of the submission.
Some of the countries for which modular certifications are provided require additional
submissions, authorizations, or import permission by the system vendor or importer. The
integrator is responsible for these additional actions.
Modular radio certification is not possible in some countries. For such countries, OEM integrators
must ensure radio certification for the end system is obtained before placing the product on the
market. A current list of applicable countries can be provided by QTI.
Contact your QTI account representative if you have questions about the additional regulatory
conformance testing and/or related submissions.