User Instructions
Table Of Contents
- 1 Introduction
- 2 Applicable Module
- 3 Available Global Modular Approvals from Qualcomm Technologies, Inc.
- 4 Additional Regulatory Conformance Testing and/or Submissions Required by the Integrator
- 5 Compliant/Allowable Transmit Power
- 6 Allowable Antennas to Use with the Radio Module
- 7 Antenna Placement Inside the Host System and RF Safety
- 8 Simultaneous Transmission with Other Integrated or Plug-In Radios
- 9 Module May Not Be Installed by End Users
- 10 Required Labeling on the Outside of the Host
- 11 Required Labeling on the Module
- 12 Required Regulatory Wording for User Manual/Installation Manual
- 13 OEM Integrator Checklist
80-KA570-12 Rev. B MAY CONTAIN U.S. AND INTERNATIONAL EXPORT CONTROLLED INFORMATION 8
3 Available Global Modular Approvals from
Qualcomm Technologies, Inc.
Module certification is limited to those countries for which Qualcomm Technologies, Inc. (QTI)
has obtained radio modular approvals. The release and distribution of QTI regulatory documents
shall follow the QTI policy through the QTI system. Customers who receive regulatory
certification documents in the QTI system are subject to the terms of their Non-Disclosure
Agreement (NDA) with QTI (Figure 3-1).
Figure 3-1 Non-Disclosure Agreement
Contact your QTI account representative to request access to the QTI system or for any questions
regarding the distribution of the regulatory documents.