User Instructions

80-KA570-12 Rev. B MAY CONTAIN U.S. AND INTERNATIONAL EXPORT CONTROLLED INFORMATION 23
13 OEM Integrator Checklist
The party below will implement the QTI Module in host systems in accordance with the
instructions specified in this document and the documents referenced herein.
 The OEM integrator will ensure the Module is integrated in a host system using only the
approved antenna models described in this document.
 The OEM integrator will ensure the antenna placement inside the host system will maintain
the required spacing to end user for RF exposure compliance, as specified in this document.
 If other radios are integrated inside the host with the Module, the OEM integrator will contact
its test lab, TCB or QTI to determine if additional FCC compliance evaluation is required to
meet FCC collocation rules.
 The OEM integrator will ensure end user documentation contains the specified regulatory
wording and that the host system and the Module itself are labeled as specified in this
document.
 The OEM integrator will ensure the Module is programmed at the factory with compliant
transmit power not exceeding the levels specified in this document.
QTI requests that the OEM integrator acknowledge its receipt of this document and the
above instructions. You may contact QTI with any questions concerning this document or
the responsibilities of the OEM integrator.
Company
name
__________________________
Signature
___________________________
Company
address
__________________________
Name
___________________________
__________________________
Title
___________________________
Email
___________________________
Phone
( ) ____________________
Please email a signed and completed copy of this acknowledgment to
[e-mail].