User Instructions
Table Of Contents
- 1 Introduction
- 2 Applicable Module
- 3 Available Global Modular Approvals from Qualcomm Technologies, Inc.
- 4 Additional Regulatory Conformance Testing and/or Submissions Required by the Integrator
- 5 Compliant/Allowable Transmit Power
- 6 Allowable Antennas to Use with the Radio Module
- 7 Antenna Placement Inside the Host System and RF Safety
- 8 Simultaneous Transmission with Other Integrated or Plug-In Radios
- 9 Module May Not Be Installed by End Users
- 10 Required Labeling on the Outside of the Host
- 11 Required Labeling on the Module
- 12 Required Regulatory Wording for User Manual/Installation Manual
- 13 OEM Integrator Checklist
QM8626 Modular Certification OEM Integrator Instructions Required Regulatory Wording for User Manual/Installation Manual
80-KA570-12 Rev. B MAY CONTAIN U.S. AND INTERNATIONAL EXPORT CONTROLLED INFORMATION 22
12.4 European Community (R&TTE) Declaration of
Conformity for System
In addition to including the radio conformity wording described in the previous section in the user
manual, the end integrator must also create and sign a European Declaration of Conformity
(DoC) for all European Directives applicable to the end product. At a minimum, this will be a
DoC per the R&TTE Directive covering radio, EMC, product safety and RF exposure essential
requirements. The DoC must reference harmonized standards used for all radios present in the
system.
Click this link for full details of R&TTE DoC requirements.
NOTE: An image of the DoC signed by the OEM integrator may be included in the user manual or a link
to the DoC on the integrator’s company web site should be provided in the user documentation.
12.5 Korea user manual wording
Korea KCC
해당 무선설비는 전파혼신 가능성이 있으므로 인명안전과 관련된 서비스는 할 수 없음